MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
Features & Benefits:
- This modified 24036BG00A cable is used for connecting rear view cameras in Nissan cars with Connect OEM multimedia system 1 / 2 / 3 generations.
- The image from the rear view camera will be automatically activated when you shift to reverse gear.
- Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
- Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24 pin socket (as shown in the connection diagram).
- After connection all OEM functions which work using this socket are preserved due to transit type of connection.
-
Only supports NTSC Cameras.
PLEASE NOTE: Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
VEHICLE COMPATIBILITY LIST
Only for the following vehicles fitted with Nissan Connect OEM multimedia system 1 / 2 / 3 /Generations (5", 7" & 8")
Vehicle fitment (guide only):
- Nissan Almera (2011-2014)
- Nissan Altima (2013-On)
- Nissan Cube (2011-2014)
- Nissan Frontier (2013-On)
- Nissan Juke (2011-On)
- Nissan Micra (2011-On)
- Nissan Murano (2014-On)
- Nissan Navara (2011-On)
- Nissan Note (2014-On)
- Nissan NP300 (2015-On)
- Nissan Note (2011-2014)
- Nissan NV Cargo (2012-2014)
- Nissan NV Passenger (2012-2014)
- Nissan NV Cargo (2014-On)
- Nissan NV200 Taxi (2014-On)
- Nissan NV Passenger (2014-On)
- Nissan Pulsar (2014-On)
- Nissan Rogue (2014-On)
- Nissan Rogue Select (2014-On)
- Nissan Sentra (2015-On)
- Nissan Titan (2013-On)
- Nissan Titan XD (2015-On)
- Nissan Versa Note (2014-On)
- Nissan Versa Sedan (2014-On)
- Nissan Tiida (2011-2014)
- Nissan Qashqai (2011-On)
- Nissan X-Trail (2011-On)
Note: The 12pin connection is for a Nissan Bluetooth connection to come into the 24pin block. The cable has 24pin either end.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
Features & Benefits:
- This modified 24036BG00A cable is used for connecting rear view cameras in Nissan cars with Connect OEM multimedia system 1 / 2 / 3 generations.
- The image from the rear view camera will be automatically activated when you shift to reverse gear.
- Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
- Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24 pin socket (as shown in the connection diagram).
- After connection all OEM functions which work using this socket are preserved due to transit type of connection.
-
Only supports NTSC Cameras.
PLEASE NOTE: Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
VEHICLE COMPATIBILITY LIST
Only for the following vehicles fitted with Nissan Connect OEM multimedia system 1 / 2 / 3 /Generations (5", 7" & 8")
Vehicle fitment (guide only):
- Nissan Almera (2011-2014)
- Nissan Altima (2013-On)
- Nissan Cube (2011-2014)
- Nissan Frontier (2013-On)
- Nissan Juke (2011-On)
- Nissan Micra (2011-On)
- Nissan Murano (2014-On)
- Nissan Navara (2011-On)
- Nissan Note (2014-On)
- Nissan NP300 (2015-On)
- Nissan Note (2011-2014)
- Nissan NV Cargo (2012-2014)
- Nissan NV Passenger (2012-2014)
- Nissan NV Cargo (2014-On)
- Nissan NV200 Taxi (2014-On)
- Nissan NV Passenger (2014-On)
- Nissan Pulsar (2014-On)
- Nissan Rogue (2014-On)
- Nissan Rogue Select (2014-On)
- Nissan Sentra (2015-On)
- Nissan Titan (2013-On)
- Nissan Titan XD (2015-On)
- Nissan Versa Note (2014-On)
- Nissan Versa Sedan (2014-On)
- Nissan Tiida (2011-2014)
- Nissan Qashqai (2011-On)
- Nissan X-Trail (2011-On)
Note: The 12pin connection is for a Nissan Bluetooth connection to come into the 24pin block. The cable has 24pin either end.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
Features & Benefits:
- This modified 24036BG00A cable is used for connecting rear view cameras in Nissan cars with Connect OEM multimedia system 1 / 2 / 3 generations.
- The image from the rear view camera will be automatically activated when you shift to reverse gear.
- Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
- Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24 pin socket (as shown in the connection diagram).
- After connection all OEM functions which work using this socket are preserved due to transit type of connection.
-
Only supports NTSC Cameras.
PLEASE NOTE: Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
VEHICLE COMPATIBILITY LIST
Only for the following vehicles fitted with Nissan Connect OEM multimedia system 1 / 2 / 3 /Generations (5", 7" & 8")
Vehicle fitment (guide only):
- Nissan Almera (2011-2014)
- Nissan Altima (2013-On)
- Nissan Cube (2011-2014)
- Nissan Frontier (2013-On)
- Nissan Juke (2011-On)
- Nissan Micra (2011-On)
- Nissan Murano (2014-On)
- Nissan Navara (2011-On)
- Nissan Note (2014-On)
- Nissan NP300 (2015-On)
- Nissan Note (2011-2014)
- Nissan NV Cargo (2012-2014)
- Nissan NV Passenger (2012-2014)
- Nissan NV Cargo (2014-On)
- Nissan NV200 Taxi (2014-On)
- Nissan NV Passenger (2014-On)
- Nissan Pulsar (2014-On)
- Nissan Rogue (2014-On)
- Nissan Rogue Select (2014-On)
- Nissan Sentra (2015-On)
- Nissan Titan (2013-On)
- Nissan Titan XD (2015-On)
- Nissan Versa Note (2014-On)
- Nissan Versa Sedan (2014-On)
- Nissan Tiida (2011-2014)
- Nissan Qashqai (2011-On)
- Nissan X-Trail (2011-On)
Note: The 12pin connection is for a Nissan Bluetooth connection to come into the 24pin block. The cable has 24pin either end.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
