MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
Features & Benefits:
- This cable allows you to connect rear view cameras in Toyota cars with MFD GEN5 and GEN6 multifunctional displays.
- The image from the rear view camera will be automatically activated when you shift to reverse gear.
- Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
- Only supports NTSC Cameras.
Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
VEHICLE COMPATIBILITY LIST
Your Toyota will need to have one of the following head units:
- TNS510 [Generation 5]
- B9030 [Generation 5]
- B9013 [Generation 5]
- B9012 [Generation 6]
- B9018 [Generation 6]
- B9028 [Generation 6]
- B9016 [Generation 6]
- B9019 [Generation 6]
- B9017 [Generation 6]
- B9020 [Generation 6]
- B9029 [Generation 6]
Vehicle fitment (guide only):
- Toyota Auris (2006-2014)
- Toyota Avensis (2006-2011)
- Toyota Camry (2009-2011)
- Toyota Corolla (2009-2010)
- Toyota Corolla Verso (2009-2022)
- Toyota Hiace (2009-2022)
- Toyota Highlander (2009-2012)
- Toyota Hilux (2006-2011)
- Toyota iQ (2008-2022)
- Toyota Land Cruiser C150 (2009-2013)
- Toyota Prius (2009-2012)
- Toyota RAV4 (2008-2013)
- Toyota Urban Cruiser (2009-2022)
- Toyota Verso (2009-2012)
- Toyota Verso S (2006-2011)
- Toyota Yaris (2006-2011)
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
Features & Benefits:
- This cable allows you to connect rear view cameras in Toyota cars with MFD GEN5 and GEN6 multifunctional displays.
- The image from the rear view camera will be automatically activated when you shift to reverse gear.
- Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
- Only supports NTSC Cameras.
Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
VEHICLE COMPATIBILITY LIST
Your Toyota will need to have one of the following head units:
- TNS510 [Generation 5]
- B9030 [Generation 5]
- B9013 [Generation 5]
- B9012 [Generation 6]
- B9018 [Generation 6]
- B9028 [Generation 6]
- B9016 [Generation 6]
- B9019 [Generation 6]
- B9017 [Generation 6]
- B9020 [Generation 6]
- B9029 [Generation 6]
Vehicle fitment (guide only):
- Toyota Auris (2006-2014)
- Toyota Avensis (2006-2011)
- Toyota Camry (2009-2011)
- Toyota Corolla (2009-2010)
- Toyota Corolla Verso (2009-2022)
- Toyota Hiace (2009-2022)
- Toyota Highlander (2009-2012)
- Toyota Hilux (2006-2011)
- Toyota iQ (2008-2022)
- Toyota Land Cruiser C150 (2009-2013)
- Toyota Prius (2009-2012)
- Toyota RAV4 (2008-2013)
- Toyota Urban Cruiser (2009-2022)
- Toyota Verso (2009-2012)
- Toyota Verso S (2006-2011)
- Toyota Yaris (2006-2011)
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
Features & Benefits:
- This cable allows you to connect rear view cameras in Toyota cars with MFD GEN5 and GEN6 multifunctional displays.
- The image from the rear view camera will be automatically activated when you shift to reverse gear.
- Plug & Play installation of aftermarket cameras without damaging the OEM wiring.
- Only supports NTSC Cameras.
Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
VEHICLE COMPATIBILITY LIST
Your Toyota will need to have one of the following head units:
- TNS510 [Generation 5]
- B9030 [Generation 5]
- B9013 [Generation 5]
- B9012 [Generation 6]
- B9018 [Generation 6]
- B9028 [Generation 6]
- B9016 [Generation 6]
- B9019 [Generation 6]
- B9017 [Generation 6]
- B9020 [Generation 6]
- B9029 [Generation 6]
Vehicle fitment (guide only):
- Toyota Auris (2006-2014)
- Toyota Avensis (2006-2011)
- Toyota Camry (2009-2011)
- Toyota Corolla (2009-2010)
- Toyota Corolla Verso (2009-2022)
- Toyota Hiace (2009-2022)
- Toyota Highlander (2009-2012)
- Toyota Hilux (2006-2011)
- Toyota iQ (2008-2022)
- Toyota Land Cruiser C150 (2009-2013)
- Toyota Prius (2009-2012)
- Toyota RAV4 (2008-2013)
- Toyota Urban Cruiser (2009-2022)
- Toyota Verso (2009-2012)
- Toyota Verso S (2006-2011)
- Toyota Yaris (2006-2011)
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
