MAIN FEATURES
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune / Link OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is enabled. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Thus you will be able to connect the video device, e.g. DVD player, Android box or TV receiver to the OEM monitor without using the video interface. All OEM functions of the monitor will work in the same way as before.
Note! In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
This product is NOT a reverse camera input cable. It is a RCA video input cable.
Features & Benefits:
- RCA video input cable to stock radio.
- Allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface
- This means the OEM functions on the monitor will work the same after installation
- Connect devices like media boxes, games consoles, streaming devices etc.
- Plug and play harness
To adjust the video system of the input video signal or switch the picture mode (4:3, 16:9), refer to the user manual of your monitor.
Please Note: After this cable connection the OEM microphone of OEM BT-HandsFree will work the same way as before (if it has been installed). if there is no OEM microphone in your car, you will need the AV cable with microphone.
VEHICLE COMPATIBILITY LIST
This 28-pin OEM video input cable is designed for models with the with the following stock head unit systems:
- Entune 2.0
- Entune 2.0 Audio
- Entune 2.0 Audio Plus
- Entune 2.0 Premium Audio
- Link (AU market)
- Touch 2
- Touch 2 with Go
- Touch 2 with Go Plus
Vehicle fitment (guide only):
- Toyota Alphard (2015-2017)
- Toyota Auris (2013-2018)
- Toyota Avensis (2015-2018)
- Toyota C-HR (2017-2020)
- Toyota GT86 (2012-2019)
- Toyota Hilux (2016 - 2020)
- Toyota Land Cruiser 150 Prado (2009-2019)
- Toyota Prius (2016-2019)
- Toyota Prius + (Prius V) (2012-2019)
- Toyota RAV4 4th gen XA40 (2013-2018)
- Toyota RAV4 5th gen (2019-2020)
- Toyota Verso (2009-2019)
- Toyota Verso S / Ractis (2011-2019)
- Toyota Yaris (2012-2020)
NOTES:
- In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
- This cable is incompatible with Entune 3.0 system.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune / Link OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is enabled. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Thus you will be able to connect the video device, e.g. DVD player, Android box or TV receiver to the OEM monitor without using the video interface. All OEM functions of the monitor will work in the same way as before.
Note! In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
This product is NOT a reverse camera input cable. It is a RCA video input cable.
Features & Benefits:
- RCA video input cable to stock radio.
- Allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface
- This means the OEM functions on the monitor will work the same after installation
- Connect devices like media boxes, games consoles, streaming devices etc.
- Plug and play harness
To adjust the video system of the input video signal or switch the picture mode (4:3, 16:9), refer to the user manual of your monitor.
Please Note: After this cable connection the OEM microphone of OEM BT-HandsFree will work the same way as before (if it has been installed). if there is no OEM microphone in your car, you will need the AV cable with microphone.
VEHICLE COMPATIBILITY LIST
This 28-pin OEM video input cable is designed for models with the with the following stock head unit systems:
- Entune 2.0
- Entune 2.0 Audio
- Entune 2.0 Audio Plus
- Entune 2.0 Premium Audio
- Link (AU market)
- Touch 2
- Touch 2 with Go
- Touch 2 with Go Plus
Vehicle fitment (guide only):
- Toyota Alphard (2015-2017)
- Toyota Auris (2013-2018)
- Toyota Avensis (2015-2018)
- Toyota C-HR (2017-2020)
- Toyota GT86 (2012-2019)
- Toyota Hilux (2016 - 2020)
- Toyota Land Cruiser 150 Prado (2009-2019)
- Toyota Prius (2016-2019)
- Toyota Prius + (Prius V) (2012-2019)
- Toyota RAV4 4th gen XA40 (2013-2018)
- Toyota RAV4 5th gen (2019-2020)
- Toyota Verso (2009-2019)
- Toyota Verso S / Ractis (2011-2019)
- Toyota Yaris (2012-2020)
NOTES:
- In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
- This cable is incompatible with Entune 3.0 system.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
