MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune / Link OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is enabled. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Features & Benefits:
- Allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems
- Allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface
- This means the OEM functions on the monitor will work the same after installation
VEHICLE COMPATIBILITY LIST
This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original system, listed below.
Compatible with the following stock head unit systems:
- Entune 2.0
- Entune 2.0 Audio
- Entune 2.0 Audio Plus
- Entune 2.0 Premium Audio
- Link
- Touch 2
- Touch 2 with Go
- Touch 2 with Go Plus
Vehicle fitment (guide only):
- Toyota Alphard (2015-2017)
- Toyota Auris (2013-2018)
- Toyota Avensis (2015-2018)
- Toyota C-HR (2017-2020)
- Toyota GT86 (2012-2019)
- Toyota Hilux (2016 - 2020)
- Toyota Land Cruiser 150 Prado (2009-2019)
- Toyota Prius (2016-2019)
- Toyota Prius + (Prius V) (2012-2019)
- Toyota RAV4 4th gen XA40 (2013-2018)
- Toyota RAV4 5th gen (2019-2020)
- Toyota Verso (2009-2019)
- Toyota Verso S / Ractis (2011-2019)
- Toyota Yaris (2012-2020)
NOTES:
- In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
- This cable is incompatible with Entune 3.0 system.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune / Link OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is enabled. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Features & Benefits:
- Allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems
- Allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface
- This means the OEM functions on the monitor will work the same after installation
VEHICLE COMPATIBILITY LIST
This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original system, listed below.
Compatible with the following stock head unit systems:
- Entune 2.0
- Entune 2.0 Audio
- Entune 2.0 Audio Plus
- Entune 2.0 Premium Audio
- Link
- Touch 2
- Touch 2 with Go
- Touch 2 with Go Plus
Vehicle fitment (guide only):
- Toyota Alphard (2015-2017)
- Toyota Auris (2013-2018)
- Toyota Avensis (2015-2018)
- Toyota C-HR (2017-2020)
- Toyota GT86 (2012-2019)
- Toyota Hilux (2016 - 2020)
- Toyota Land Cruiser 150 Prado (2009-2019)
- Toyota Prius (2016-2019)
- Toyota Prius + (Prius V) (2012-2019)
- Toyota RAV4 4th gen XA40 (2013-2018)
- Toyota RAV4 5th gen (2019-2020)
- Toyota Verso (2009-2019)
- Toyota Verso S / Ractis (2011-2019)
- Toyota Yaris (2012-2020)
NOTES:
- In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
- This cable is incompatible with Entune 3.0 system.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This cable allows you to arrange audio and video input in Toyota Touch 2 / Entune / Link OEM monitors without using the video interface. After the cable connection "AV input" icon is automatically activated in the monitor and video in motion is enabled. As a result you receive fully functional AV input with possibility to connect composite video signal PAL\NTSC and also linear stereo signal.
Features & Benefits:
- Allows you to add an aftermarket rear view camera to Toyota models with original Toyota Touch 2 systems
- Allows you to arrange audio and video input in Toyota Touch 2 OEM monitors without using the video interface
- This means the OEM functions on the monitor will work the same after installation
VEHICLE COMPATIBILITY LIST
This 28 pin OEM camera adapter cable allows you to add an aftermarket rear view camera to Toyota models with original system, listed below.
Compatible with the following stock head unit systems:
- Entune 2.0
- Entune 2.0 Audio
- Entune 2.0 Audio Plus
- Entune 2.0 Premium Audio
- Link
- Touch 2
- Touch 2 with Go
- Touch 2 with Go Plus
Vehicle fitment (guide only):
- Toyota Alphard (2015-2017)
- Toyota Auris (2013-2018)
- Toyota Avensis (2015-2018)
- Toyota C-HR (2017-2020)
- Toyota GT86 (2012-2019)
- Toyota Hilux (2016 - 2020)
- Toyota Land Cruiser 150 Prado (2009-2019)
- Toyota Prius (2016-2019)
- Toyota Prius + (Prius V) (2012-2019)
- Toyota RAV4 4th gen XA40 (2013-2018)
- Toyota RAV4 5th gen (2019-2020)
- Toyota Verso (2009-2019)
- Toyota Verso S / Ractis (2011-2019)
- Toyota Yaris (2012-2020)
NOTES:
- In some car models the speed wire (SPD) should be disconnected while driving to be able to display picture from connected sources. However, this may cause problems when using OEM navigation system. Therefore, this wire should be connected to be able to use OEM navigation.
- This cable is incompatible with Entune 3.0 system.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
