MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected. The interface has a feature to allow manual activation of the front camera, this is done by pressing and holding the LIST button on the steering wheel, this feature also allows the front camera input to be used as a general video input for DVD and other video devices.
Features & Benefits:
- No coding required
- Integrates with the LVDS cable behind the vehicle head unit
- Rear camera will activate as soon as reverse gear is engaged
- Interface has a feature to allow manual activation of the front camera
- Allows the front camera input to be used as a general video input for DVD and other video devices
- CAMERAS NOT INCLUDED (Sold Separately)
VEHICLE COMPATIBILITY LIST
WHAT IS SMEG? SMEG is one of Peugeot's factory fitted navigation systems. Also identified as SMEG/ SMEG+/ DS Connect Nav Touch, the system features a 7 inch touch screen monitor with a 4pin HSD LVDS standard quadlock.
Vehicle fitment (guide only):
- Citroen Berlingo (2015-2018)
- Citroen C3 [MK2] (2010-2016)
- Citroen C4 [MK2] (2011-2018)
- Citroen C4 Cactus (2014 onwards)
- Citroen C4 Picasso [MK2] (2013 onwards)
- Citroen C5 [RD/TD] (2008-2017)
- Citroen DS3 (2010-2019)
- Citroen DS4 (2011-2018)
- Citroen DS5 (2012-2016)
- Peugeot 2008 [MK1 Facelift] (2013-2019)
- Peugeot 3008 (2013-2017)
- Peugeot 5008 (2014-2016)
- Peugeot 208 (2012 onwards)
- Peugeot 308 [MK2 T9] (2013 onwards)
- Peugeot 408 [MK2] (2014 onwards)
- Peugeot 508 [MK1] (2010-2018)
- Peugeot Expert (2013-2016)
Installation Note: Ignition must be turned off before installing the interface. The plug and play quadlock harness is connected behind the car's original radio. Set the dip switches on the unit first before powering the interface. If changing the dip switches you must power down the interface first. On manual cars you may need to connect a cable from the interface to a reverse trigger wire such as the reverse light feed.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected. The interface has a feature to allow manual activation of the front camera, this is done by pressing and holding the LIST button on the steering wheel, this feature also allows the front camera input to be used as a general video input for DVD and other video devices.
Features & Benefits:
- No coding required
- Integrates with the LVDS cable behind the vehicle head unit
- Rear camera will activate as soon as reverse gear is engaged
- Interface has a feature to allow manual activation of the front camera
- Allows the front camera input to be used as a general video input for DVD and other video devices
- CAMERAS NOT INCLUDED (Sold Separately)
VEHICLE COMPATIBILITY LIST
WHAT IS SMEG? SMEG is one of Peugeot's factory fitted navigation systems. Also identified as SMEG/ SMEG+/ DS Connect Nav Touch, the system features a 7 inch touch screen monitor with a 4pin HSD LVDS standard quadlock.
Vehicle fitment (guide only):
- Citroen Berlingo (2015-2018)
- Citroen C3 [MK2] (2010-2016)
- Citroen C4 [MK2] (2011-2018)
- Citroen C4 Cactus (2014 onwards)
- Citroen C4 Picasso [MK2] (2013 onwards)
- Citroen C5 [RD/TD] (2008-2017)
- Citroen DS3 (2010-2019)
- Citroen DS4 (2011-2018)
- Citroen DS5 (2012-2016)
- Peugeot 2008 [MK1 Facelift] (2013-2019)
- Peugeot 3008 (2013-2017)
- Peugeot 5008 (2014-2016)
- Peugeot 208 (2012 onwards)
- Peugeot 308 [MK2 T9] (2013 onwards)
- Peugeot 408 [MK2] (2014 onwards)
- Peugeot 508 [MK1] (2010-2018)
- Peugeot Expert (2013-2016)
Installation Note: Ignition must be turned off before installing the interface. The plug and play quadlock harness is connected behind the car's original radio. Set the dip switches on the unit first before powering the interface. If changing the dip switches you must power down the interface first. On manual cars you may need to connect a cable from the interface to a reverse trigger wire such as the reverse light feed.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This interface allows you to add a rear and front camera to the OEM monitor of Peugeot and Citroen cars with SMEG navigation screens It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected. The interface has a feature to allow manual activation of the front camera, this is done by pressing and holding the LIST button on the steering wheel, this feature also allows the front camera input to be used as a general video input for DVD and other video devices.
Features & Benefits:
- No coding required
- Integrates with the LVDS cable behind the vehicle head unit
- Rear camera will activate as soon as reverse gear is engaged
- Interface has a feature to allow manual activation of the front camera
- Allows the front camera input to be used as a general video input for DVD and other video devices
- CAMERAS NOT INCLUDED (Sold Separately)
VEHICLE COMPATIBILITY LIST
WHAT IS SMEG? SMEG is one of Peugeot's factory fitted navigation systems. Also identified as SMEG/ SMEG+/ DS Connect Nav Touch, the system features a 7 inch touch screen monitor with a 4pin HSD LVDS standard quadlock.
Vehicle fitment (guide only):
- Citroen Berlingo (2015-2018)
- Citroen C3 [MK2] (2010-2016)
- Citroen C4 [MK2] (2011-2018)
- Citroen C4 Cactus (2014 onwards)
- Citroen C4 Picasso [MK2] (2013 onwards)
- Citroen C5 [RD/TD] (2008-2017)
- Citroen DS3 (2010-2019)
- Citroen DS4 (2011-2018)
- Citroen DS5 (2012-2016)
- Peugeot 2008 [MK1 Facelift] (2013-2019)
- Peugeot 3008 (2013-2017)
- Peugeot 5008 (2014-2016)
- Peugeot 208 (2012 onwards)
- Peugeot 308 [MK2 T9] (2013 onwards)
- Peugeot 408 [MK2] (2014 onwards)
- Peugeot 508 [MK1] (2010-2018)
- Peugeot Expert (2013-2016)
Installation Note: Ignition must be turned off before installing the interface. The plug and play quadlock harness is connected behind the car's original radio. Set the dip switches on the unit first before powering the interface. If changing the dip switches you must power down the interface first. On manual cars you may need to connect a cable from the interface to a reverse trigger wire such as the reverse light feed.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
