MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This interface allows you to add rear and front cameras to the OEM monitor of select VW, Audi & Skoda group cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Features & Benefits:
- Front and Rear Camera input
- Auto-switching when reverse is selected
- Moving parking guidelines (responds to the direction of vehicle in reverse)
- PDC overlay (selectable if no sensors fitted)
- NTSC input
-
Connects at the head-unit control module beneath glove box
- CAMERAS NOT INCLUDED (Sold Separately)
VEHICLE COMPATIBILITY LIST
For Models with MIB3 10" screen on the Volkswagen ID range. The interface comes with a plug and play T harness to connect to the CAN bus control gateway J533. This provides CAN high and low, ground & 12V supply. It is difficult to access without removing most of the drivers and passenger side under-dash too as it is hidden behind the bracket holding the head-unit module, so an alternative hard wire option is shown on the next page. The 2 x LVDS video cables allow video transfer from the control module to the dash display. The leads connect between the PINK LVDS connector on the head-unit control module J794 /5F
Vehicle fitment (guide only):
- Volkswagen ID.3 (2019-Onwards)
- Volkswagen ID.4 (2020-Onwards)
- Volkswagen ID.5 (2022-Onwards)
PLEASE NOTE: vehicle must have MIB3 system with 10" screen
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This interface allows you to add rear and front cameras to the OEM monitor of select VW, Audi & Skoda group cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Features & Benefits:
- Front and Rear Camera input
- Auto-switching when reverse is selected
- Moving parking guidelines (responds to the direction of vehicle in reverse)
- PDC overlay (selectable if no sensors fitted)
- NTSC input
-
Connects at the head-unit control module beneath glove box
- CAMERAS NOT INCLUDED (Sold Separately)
VEHICLE COMPATIBILITY LIST
For Models with MIB3 10" screen on the Volkswagen ID range. The interface comes with a plug and play T harness to connect to the CAN bus control gateway J533. This provides CAN high and low, ground & 12V supply. It is difficult to access without removing most of the drivers and passenger side under-dash too as it is hidden behind the bracket holding the head-unit module, so an alternative hard wire option is shown on the next page. The 2 x LVDS video cables allow video transfer from the control module to the dash display. The leads connect between the PINK LVDS connector on the head-unit control module J794 /5F
Vehicle fitment (guide only):
- Volkswagen ID.3 (2019-Onwards)
- Volkswagen ID.4 (2020-Onwards)
- Volkswagen ID.5 (2022-Onwards)
PLEASE NOTE: vehicle must have MIB3 system with 10" screen
MAIN FEATURES
Audio Tech Direct now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply.
This is a plug-and-play "T" Harness that allows you to easily add a back-up camera (when your vehicle did not come with a OEM backup camera) to select OEM systems while retaining factory settings. Ditch the wires and discover the simplicity of true plug-and-play. Disconnect the factory connector and connect our T-Harness inline.
This interface allows you to add rear and front cameras to the OEM monitor of select VW, Audi & Skoda group cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.
Features & Benefits:
- Front and Rear Camera input
- Auto-switching when reverse is selected
- Moving parking guidelines (responds to the direction of vehicle in reverse)
- PDC overlay (selectable if no sensors fitted)
- NTSC input
-
Connects at the head-unit control module beneath glove box
- CAMERAS NOT INCLUDED (Sold Separately)
VEHICLE COMPATIBILITY LIST
For Models with MIB3 10" screen on the Volkswagen ID range. The interface comes with a plug and play T harness to connect to the CAN bus control gateway J533. This provides CAN high and low, ground & 12V supply. It is difficult to access without removing most of the drivers and passenger side under-dash too as it is hidden behind the bracket holding the head-unit module, so an alternative hard wire option is shown on the next page. The 2 x LVDS video cables allow video transfer from the control module to the dash display. The leads connect between the PINK LVDS connector on the head-unit control module J794 /5F
Vehicle fitment (guide only):
- Volkswagen ID.3 (2019-Onwards)
- Volkswagen ID.4 (2020-Onwards)
- Volkswagen ID.5 (2022-Onwards)
PLEASE NOTE: vehicle must have MIB3 system with 10" screen
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
