MAIN FEATURES
A discreet, Defender-specific reverse camera that integrates around the factory rear washer jet above the rear window, delivering a central, high-level viewpoint and a clean OEM-style finish. Compatible with any aftermarket head unit or display with a camera input, including both AHD and traditional CVBS systems.
The camera housing follows the OE washer jet outline for a seamless, factory look and more useful rearward visibility than low-mounted cameras. The kit includes a 3M self-adhesive rubber seal for a secure fit between the housing and vehicle body.
One-size-fits-all for AHD and CVBS: supports high-definition and non-HD screens (e.g., Alpine Halo, Stinger HEIGH10), with selectable parking lines and wide-angle modes.
Key Features:
- Defender-specific mount: Central high-level fit around the OE rear washer jet above the rear window for a stealthy OEM appearance.
- Wide field of view: 180° horizontal FOV and 90° vertical FOV for maximum rear coverage; selectable parking lines.
- Dual video formats: AHD and CVBS supported in a single unit; compatible with HD and non-HD screens.
- Durable construction: Waterproof housing, anti-fog lens, dustproof and shockproof for reliable operation in all conditions.
- High image quality: High-resolution colour imaging with enhanced brightness for night use and superior daytime sharpness.
- Clean install: Includes 3M rubber seal, wiring harness, fixings; optional piggy-back loom simplifies power feed from reverse lamp.
- Paintable housing: Plastic camera housing can be painted to match vehicle trim.
Technical specifications:
- Sensor: 1/3 CMOS chip
- Resolution: 1280 × 720 (AHD); 720 × 480 (NTSC wide-angle)
- Image modes: AHD / NTSC with selectable parking lines
- Certification: E-certified camera
What’s in the box:
- Camera assembly: Camera, plinth and gasket
- Cabling: RCA wiring cables
- Fixings: All required fixings included
- Instructions: Full-colour fitting guide
VEHICLE COMPATIBILITY LIST
This product has been designed for the following vehicles:
- Land Rover Defender (2007-2016)
Notes & FAQs:
- Tow bar visibility: The spare wheel obstructs the tow bar; it will not be visible in the camera view.
- Aftermarket washer jets: Most billet-style jets are larger than OE and typically not compatible with the housing.
- Land Rover Defender 90/110/130: Classic Defender models with the rear washer jet above the rear window; integrates at the high-level central position.
- Head units/displays: Compatible with any aftermarket radio or display that provides a camera input (AHD or CVBS).
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
A discreet, Defender-specific reverse camera that integrates around the factory rear washer jet above the rear window, delivering a central, high-level viewpoint and a clean OEM-style finish. Compatible with any aftermarket head unit or display with a camera input, including both AHD and traditional CVBS systems.
The camera housing follows the OE washer jet outline for a seamless, factory look and more useful rearward visibility than low-mounted cameras. The kit includes a 3M self-adhesive rubber seal for a secure fit between the housing and vehicle body.
One-size-fits-all for AHD and CVBS: supports high-definition and non-HD screens (e.g., Alpine Halo, Stinger HEIGH10), with selectable parking lines and wide-angle modes.
Key Features:
- Defender-specific mount: Central high-level fit around the OE rear washer jet above the rear window for a stealthy OEM appearance.
- Wide field of view: 180° horizontal FOV and 90° vertical FOV for maximum rear coverage; selectable parking lines.
- Dual video formats: AHD and CVBS supported in a single unit; compatible with HD and non-HD screens.
- Durable construction: Waterproof housing, anti-fog lens, dustproof and shockproof for reliable operation in all conditions.
- High image quality: High-resolution colour imaging with enhanced brightness for night use and superior daytime sharpness.
- Clean install: Includes 3M rubber seal, wiring harness, fixings; optional piggy-back loom simplifies power feed from reverse lamp.
- Paintable housing: Plastic camera housing can be painted to match vehicle trim.
Technical specifications:
- Sensor: 1/3 CMOS chip
- Resolution: 1280 × 720 (AHD); 720 × 480 (NTSC wide-angle)
- Image modes: AHD / NTSC with selectable parking lines
- Certification: E-certified camera
What’s in the box:
- Camera assembly: Camera, plinth and gasket
- Cabling: RCA wiring cables
- Fixings: All required fixings included
- Instructions: Full-colour fitting guide
VEHICLE COMPATIBILITY LIST
This product has been designed for the following vehicles:
- Land Rover Defender (2007-2016)
Notes & FAQs:
- Tow bar visibility: The spare wheel obstructs the tow bar; it will not be visible in the camera view.
- Aftermarket washer jets: Most billet-style jets are larger than OE and typically not compatible with the housing.
- Land Rover Defender 90/110/130: Classic Defender models with the rear washer jet above the rear window; integrates at the high-level central position.
- Head units/displays: Compatible with any aftermarket radio or display that provides a camera input (AHD or CVBS).
MAIN FEATURES
A discreet, Defender-specific reverse camera that integrates around the factory rear washer jet above the rear window, delivering a central, high-level viewpoint and a clean OEM-style finish. Compatible with any aftermarket head unit or display with a camera input, including both AHD and traditional CVBS systems.
The camera housing follows the OE washer jet outline for a seamless, factory look and more useful rearward visibility than low-mounted cameras. The kit includes a 3M self-adhesive rubber seal for a secure fit between the housing and vehicle body.
One-size-fits-all for AHD and CVBS: supports high-definition and non-HD screens (e.g., Alpine Halo, Stinger HEIGH10), with selectable parking lines and wide-angle modes.
Key Features:
- Defender-specific mount: Central high-level fit around the OE rear washer jet above the rear window for a stealthy OEM appearance.
- Wide field of view: 180° horizontal FOV and 90° vertical FOV for maximum rear coverage; selectable parking lines.
- Dual video formats: AHD and CVBS supported in a single unit; compatible with HD and non-HD screens.
- Durable construction: Waterproof housing, anti-fog lens, dustproof and shockproof for reliable operation in all conditions.
- High image quality: High-resolution colour imaging with enhanced brightness for night use and superior daytime sharpness.
- Clean install: Includes 3M rubber seal, wiring harness, fixings; optional piggy-back loom simplifies power feed from reverse lamp.
- Paintable housing: Plastic camera housing can be painted to match vehicle trim.
Technical specifications:
- Sensor: 1/3 CMOS chip
- Resolution: 1280 × 720 (AHD); 720 × 480 (NTSC wide-angle)
- Image modes: AHD / NTSC with selectable parking lines
- Certification: E-certified camera
What’s in the box:
- Camera assembly: Camera, plinth and gasket
- Cabling: RCA wiring cables
- Fixings: All required fixings included
- Instructions: Full-colour fitting guide
VEHICLE COMPATIBILITY LIST
This product has been designed for the following vehicles:
- Land Rover Defender (2007-2016)
Notes & FAQs:
- Tow bar visibility: The spare wheel obstructs the tow bar; it will not be visible in the camera view.
- Aftermarket washer jets: Most billet-style jets are larger than OE and typically not compatible with the housing.
- Land Rover Defender 90/110/130: Classic Defender models with the rear washer jet above the rear window; integrates at the high-level central position.
- Head units/displays: Compatible with any aftermarket radio or display that provides a camera input (AHD or CVBS).
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
