ATD DLC CAMSK04 Dynamic Lines IPAS Rear Reverse Camera Boot Handle For Audi Seat Skoda & VW

MAIN FEATURES

Introducing our very own Audio Tech Direct DLC (DYNAMIC LINE CAMERA) reverse camera range.

Exclusive to ATD, our range of after-market cameras are designed to help eliminate key blind spots around the rear, so that you can reverse more easily, confidently and safely. Designed to turn on their displays the very moment you shift the vehicle into reverse. That then gives you a clear and unobstructed view of the space immediately behind - particularly useful for manoeuvring the vehicles bulk around solid obstacles like low walls or parking bollards.

What makes ATD DLC cameras different from the rest?

To our fraustrations, the online market is peppered with many cheap cameras, many with false specifications and claims. Cameras are something ultimately, you get what you pay for. We've been specialising in cameras for over a decade and decided we wanted some custom built with our own specifications in mind.

Here are a few details that set our products apart:

1. We are using true 600K TVL D1 resolution cameras with our dynamic range.
2. The design of this camera takes the CANBUS data from the vehicle to project the dynamic lines via IPAS (Intelligent Parking Assistance System)
3. We only use the officially licensed image sensors directly from CVSENS. We designed the PCB Board and we make the PCB Board by our own SMT machines.
4. We use a premium, high quality glass lens instead of those low quality plastic lens that will end up being deformed by heat or weathering.
5. We only use high quality silicone adhesive for a waterproof seal. Each and every camera in the ATD DLC range will have been tested in water for hours. Our waterproof rating is certificated at IP68X, which is the very top of the IP rating scale.
6. We add Nylon & Fiber into camera's housing so it is more flexible than the simple ABS plastic. Cheaper, lesser products will have clips and fittings made of simple plastic, which can be easily broken.
7. All of our Audio Tech Direct DLC range reversing cameras are supplied with a free 18-month warranty, so that you can have complete peace of mind in the performance and reliability of your in-car tech. 

ATD DLC SERIES FEATURES: 

• 600K TVL CVBS NTSC video format 
• Comes with 6m shielded cable with fuse tap and earth fork connector
• 130 degree HORIZONTAL wide angle view
• 1/3" colour sharp CVSENS image sensor
• E-mark certified product with CE and RHOS approval
• Exclusive product range to Audio Tech Direct​ - you won't find these anywhere else and you won't find a comparable product.

PLEASE NOTE: The Audio Tech Direct LED camera range are AFTER-MARKET cameras. They are designed for use use with after-market monitors and head units. They are not OEM factory replacement cameras. We do sell camera interfaces and camera input cables for stock OEM radios separately, should you require. 

VEHICLE COMPATIBILITY LIST

We have this product listed out as being tried and fitted with variants of the vehicles listed below. We strongly recommend you cross reference the details in the description against your vehicle to ensure the item is suitable for your vehicle.

This particular model can be used with after-market head unit installs OR it could also be used with factory MIB head units but would need to be coded with VAGCOM/CVDS/ODIS to activate the RVC mode on the headunit. 

COMPATIBLE WITH THE FOLLOWING MODELS:

• Audi A3 [MK3 8V Facelift] (2016-2019)
• Audi A4 [B9] (2016-2019)
• Audi A6 [C8] (2016-2019)
• SEAT Tarraco [KN2] (2018-2021)
• Skoda Octavia [MK3 Facelift] (2016-2019)
• Skoda Rapid (2016-2019)
• Skoda Superb [MK3 B8] (2016-2019)
• Volkswagen Bora [MK8] (2016-2019)
• Volkswagen C-TREK (2016-2020)
• Volkswagen Caddy [MK3 Facelift Up & Over Door Only] (2016-2020)
• Volkswagen Golf [MK7.5] (2016-2019)
• Volkswagen Polo [MK6] (2016-2020)
• Volkswagen Touran [MK2] (2015-2020)
• Volkswagen Tiguan [MK2] (2016-2020)

SIZE: 110mm x 50mm | Designed to replace the OEM boot handle part number 3V0827566

NOTE: This vehicle list is a guide only. Whilst we try and make every effort to make the fitment list as accurate as we can, we cannot cover all variants of each application. It is up to you, the customer, to ensure you double check that the item matches the existing space on the vehicle and also that the product that the camera will connect to will be able to connect and function with the head unit or monitor.