AudioControl has over 45 years of experience engineering top-quality audio components. Buckle up and get ready to embark on a wild new auditory adventure with AudioControl’s PNW speakers! Experience the vibrant landscapes of the Pacific Northwest through your music when you combine AudioControl’s legendary amplifiers with the new PNW series of speakers. Trust us, you’ve never heard sound quite like this before. The PNW line features an edge-enhanced steel frame for ultimate structural strength, a black anodized voice coil former for superior heat dissipation, and a linear double-roll surround for precise cone movement. Plus, the rigid poly mica-coated cone optimizes sound reproduction.
Worried about installation? Don’t be! Our speaker sets come with high-quality mounting hardware, so you can enjoy your new sound system hassle-free. The tweeter’s point source design even aligns the output of both drivers perfectly, resulting in better speaker alignment for amazing sound quality. Looking for the full package? Pair PNW with our Spike or Space series subwoofers for the ultimate in-vehicle listening experience. All of these features add up to a line of speakers that are not only impressive on paper but are sure to impress you with their detail, clarity, and volume every time you drive.
Features:
- Frame: Edge-enhanced steel frame for added structural strength
- Voice Coil Former: Black anodized for superior heat dissipation
- Surround: Linear double-roll surround for precise cone movement
- Motor: FEA-designed high-efficiency motor for optimal performance
- Cone: Rigid poly mica-coated cone for optimized sound reproduction
- Tweeter: Rear dampened hybrid silk dome for extended frequency response
- Installation: High-quality mounting hardware included
Specifications:
- Power: 100W RMS / 125W Max
- DC Resistance (Re): 2.3 Ohms
- Frequency Response: 60Hz – 20kHz
- Crossover Type: 2nd order Linkwitz-Riley
- Filter Type: High Pass / Low Pass (HP / LP)
- XO Frequency: 3.5 kHz HP / LP
- Slope: -12 dB / Octave
- Tweeter Voice Coil Diameter: 25 mm
- Midrange Voice Coil Diameter: 35 mm
In the Box:
- (2) PNW-65CS2 Component Speakers
Dimensions – Midrange Speaker:
- Overall Diameter (without grille): 6.5 in / 166 mm
- Cut Out Diameter: 5.59 in / 142 mm
- Mounting Depth: 2.36 in / 60 mm
- Mounting Height (without grille): 0.20 in / 5.2 mm
- Mounting Height (with grille): 0.86 in / 22 mm
- Motor Diameter (with cover): 4.6 in / 117 mm
- Grille Overall Diameter: 7.05 in / 179 mm
Dimensions – Tweeter:
- Overall Diameter: 2.13 in / 54 mm
- Cut Out Diameter: 1.85 in / 47 mm
- Mounting Depth: 0.63 in / 16 mm
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
AudioControl has over 45 years of experience engineering top-quality audio components. Buckle up and get ready to embark on a wild new auditory adventure with AudioControl’s PNW speakers! Experience the vibrant landscapes of the Pacific Northwest through your music when you combine AudioControl’s legendary amplifiers with the new PNW series of speakers. Trust us, you’ve never heard sound quite like this before. The PNW line features an edge-enhanced steel frame for ultimate structural strength, a black anodized voice coil former for superior heat dissipation, and a linear double-roll surround for precise cone movement. Plus, the rigid poly mica-coated cone optimizes sound reproduction.
Worried about installation? Don’t be! Our speaker sets come with high-quality mounting hardware, so you can enjoy your new sound system hassle-free. The tweeter’s point source design even aligns the output of both drivers perfectly, resulting in better speaker alignment for amazing sound quality. Looking for the full package? Pair PNW with our Spike or Space series subwoofers for the ultimate in-vehicle listening experience. All of these features add up to a line of speakers that are not only impressive on paper but are sure to impress you with their detail, clarity, and volume every time you drive.
Features:
- Frame: Edge-enhanced steel frame for added structural strength
- Voice Coil Former: Black anodized for superior heat dissipation
- Surround: Linear double-roll surround for precise cone movement
- Motor: FEA-designed high-efficiency motor for optimal performance
- Cone: Rigid poly mica-coated cone for optimized sound reproduction
- Tweeter: Rear dampened hybrid silk dome for extended frequency response
- Installation: High-quality mounting hardware included
Specifications:
- Power: 100W RMS / 125W Max
- DC Resistance (Re): 2.3 Ohms
- Frequency Response: 60Hz – 20kHz
- Crossover Type: 2nd order Linkwitz-Riley
- Filter Type: High Pass / Low Pass (HP / LP)
- XO Frequency: 3.5 kHz HP / LP
- Slope: -12 dB / Octave
- Tweeter Voice Coil Diameter: 25 mm
- Midrange Voice Coil Diameter: 35 mm
In the Box:
- (2) PNW-65CS2 Component Speakers
Dimensions – Midrange Speaker:
- Overall Diameter (without grille): 6.5 in / 166 mm
- Cut Out Diameter: 5.59 in / 142 mm
- Mounting Depth: 2.36 in / 60 mm
- Mounting Height (without grille): 0.20 in / 5.2 mm
- Mounting Height (with grille): 0.86 in / 22 mm
- Motor Diameter (with cover): 4.6 in / 117 mm
- Grille Overall Diameter: 7.05 in / 179 mm
Dimensions – Tweeter:
- Overall Diameter: 2.13 in / 54 mm
- Cut Out Diameter: 1.85 in / 47 mm
- Mounting Depth: 0.63 in / 16 mm
AudioControl has over 45 years of experience engineering top-quality audio components. Buckle up and get ready to embark on a wild new auditory adventure with AudioControl’s PNW speakers! Experience the vibrant landscapes of the Pacific Northwest through your music when you combine AudioControl’s legendary amplifiers with the new PNW series of speakers. Trust us, you’ve never heard sound quite like this before. The PNW line features an edge-enhanced steel frame for ultimate structural strength, a black anodized voice coil former for superior heat dissipation, and a linear double-roll surround for precise cone movement. Plus, the rigid poly mica-coated cone optimizes sound reproduction.
Worried about installation? Don’t be! Our speaker sets come with high-quality mounting hardware, so you can enjoy your new sound system hassle-free. The tweeter’s point source design even aligns the output of both drivers perfectly, resulting in better speaker alignment for amazing sound quality. Looking for the full package? Pair PNW with our Spike or Space series subwoofers for the ultimate in-vehicle listening experience. All of these features add up to a line of speakers that are not only impressive on paper but are sure to impress you with their detail, clarity, and volume every time you drive.
Features:
- Frame: Edge-enhanced steel frame for added structural strength
- Voice Coil Former: Black anodized for superior heat dissipation
- Surround: Linear double-roll surround for precise cone movement
- Motor: FEA-designed high-efficiency motor for optimal performance
- Cone: Rigid poly mica-coated cone for optimized sound reproduction
- Tweeter: Rear dampened hybrid silk dome for extended frequency response
- Installation: High-quality mounting hardware included
Specifications:
- Power: 100W RMS / 125W Max
- DC Resistance (Re): 2.3 Ohms
- Frequency Response: 60Hz – 20kHz
- Crossover Type: 2nd order Linkwitz-Riley
- Filter Type: High Pass / Low Pass (HP / LP)
- XO Frequency: 3.5 kHz HP / LP
- Slope: -12 dB / Octave
- Tweeter Voice Coil Diameter: 25 mm
- Midrange Voice Coil Diameter: 35 mm
In the Box:
- (2) PNW-65CS2 Component Speakers
Dimensions – Midrange Speaker:
- Overall Diameter (without grille): 6.5 in / 166 mm
- Cut Out Diameter: 5.59 in / 142 mm
- Mounting Depth: 2.36 in / 60 mm
- Mounting Height (without grille): 0.20 in / 5.2 mm
- Mounting Height (with grille): 0.86 in / 22 mm
- Motor Diameter (with cover): 4.6 in / 117 mm
- Grille Overall Diameter: 7.05 in / 179 mm
Dimensions – Tweeter:
- Overall Diameter: 2.13 in / 54 mm
- Cut Out Diameter: 1.85 in / 47 mm
- Mounting Depth: 0.63 in / 16 mm
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
