MAIN FEATURES
This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to.
PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.
FEATURES:
- Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
- Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
- Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
- Please check the connections in the vehicle match the harness you are purchasing
VEHICLE COMPATIBILITY LIST
Steering wheel control interface and radio adapter cable for Nissan Elgrand, X-Trail, Almera and Terrano cars to fit an aftermarket radio upgrade.
The cable adapts from the Nissan twin 10 and 6 pin connectors and the smaller 16 pin connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug and play installation.
PLEASE NOTE: NOT COMPATIBLE WITH THE FOLLWING RADIO ON SELECT NISSAN ELGRAND MODELS
Vehicle fitment (guide only):
- Nissan - 350Z (2003 - 2010)
- Nissan - Elgrand E50 (1997 - 2002)
- Nissan - Elgrand E51 (2002 - 2010)
- Nissan - Murano 1st Gen (Z50) (2005 - 2008 )
- Nissan - Navara (D40) (2005 - 2016)
- Nissan - Pathfinder R51 (2005 - 2013)
- Nissan - X-Trail 1st Gen (T30) (2001 - 2007)
Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to.
PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.
FEATURES:
- Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
- Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
- Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
- Please check the connections in the vehicle match the harness you are purchasing
VEHICLE COMPATIBILITY LIST
Steering wheel control interface and radio adapter cable for Nissan Elgrand, X-Trail, Almera and Terrano cars to fit an aftermarket radio upgrade.
The cable adapts from the Nissan twin 10 and 6 pin connectors and the smaller 16 pin connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug and play installation.
PLEASE NOTE: NOT COMPATIBLE WITH THE FOLLWING RADIO ON SELECT NISSAN ELGRAND MODELS
Vehicle fitment (guide only):
- Nissan - 350Z (2003 - 2010)
- Nissan - Elgrand E50 (1997 - 2002)
- Nissan - Elgrand E51 (2002 - 2010)
- Nissan - Murano 1st Gen (Z50) (2005 - 2008 )
- Nissan - Navara (D40) (2005 - 2016)
- Nissan - Pathfinder R51 (2005 - 2013)
- Nissan - X-Trail 1st Gen (T30) (2001 - 2007)
Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.
MAIN FEATURES
This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to.
PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.
FEATURES:
- Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
- Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
- Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
- Please check the connections in the vehicle match the harness you are purchasing
VEHICLE COMPATIBILITY LIST
Steering wheel control interface and radio adapter cable for Nissan Elgrand, X-Trail, Almera and Terrano cars to fit an aftermarket radio upgrade.
The cable adapts from the Nissan twin 10 and 6 pin connectors and the smaller 16 pin connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.
The steering wheel control interface is built in to the adapter cable for a plug and play installation.
PLEASE NOTE: NOT COMPATIBLE WITH THE FOLLWING RADIO ON SELECT NISSAN ELGRAND MODELS
Vehicle fitment (guide only):
- Nissan - 350Z (2003 - 2010)
- Nissan - Elgrand E50 (1997 - 2002)
- Nissan - Elgrand E51 (2002 - 2010)
- Nissan - Murano 1st Gen (Z50) (2005 - 2008 )
- Nissan - Navara (D40) (2005 - 2016)
- Nissan - Pathfinder R51 (2005 - 2013)
- Nissan - X-Trail 1st Gen (T30) (2001 - 2007)
Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
