InCarTec 29-UC-050-MB05 Steering Wheel Control Interface ISO For Mercedes And Volkswagen

MAIN FEATURES

This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to. 

PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.

FEATURES:

• The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.

• The CANbus steering wheel control interface is built in to the adapter cable for a plug and play installation
• This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume and track skip buttons.
• The CANbus interface will also provide ignition, illumination, reverse gear, handbrake and speed pulse outputs.

VEHICLE COMPATIBILITY LIST

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

PLEASE NOTE: 

This interface is only suitable for Mercedes vehicles with factory fitted Audio 5/Sound 5 systems (Volkswagen Crafter RCD2001)

Cars with original harman/kardon or BOSE amplified audio systems will require an additional interface to retain the audio with the original amplifier. ART-23241 

Vehicle fitment (guide only):

• Mercedes A-Class (2nd Gen) W169 (2005-2011)
• Mercedes B-Class (1st Gen) W245 (2005-2011)
• Mercedes Sprinter (W903) (1995-2006)
• Mercedes Sprinter (W906) NCV3 (2007-2018)
• Mercedes Viano (W639) (2004-2014)
• Mercedes Vito 2nd Gen (W639) (2003-2014)
• Volkswagen Crafter 1st Gen (Type 2E/2F) (2006-2016)

Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.