VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
- BMW 1 Series (E81/E82/E87/E88) 03/2004 – 10/2013
- BMW 3 Series (E90/E91/E92/E93) 03/2005 – 10/2013
- BMW X1 (E84) 10/2009 – 06/2015
- BMW Z4 (E89) 05/2009 – 08/2016
Products:
- Colour: Black
- Head Unit Display Cut-Out: 1-DIN standard
- System Type: CANBUS Vehicle
- Includes: 1-DIN radio fascia with radio connection kit and steering wheel remote control
Connection Types
- 40-pin Quadlock BMW connector → Main CAN bus interface
- OEM Steering Wheel Control → 3.5 mm jack / loose cable
- +12V Continuous Power, yellow terminal 30, battery fused
- OEM Antenna Fakra (F) → DIN (M) radio adapter
Provided Signals
- Red: +12 V Ignition Terminal 15
- Orange: +12 V Lighting Terminal 58
- Purple/White: +12 V Reverse Signal
- Pink: Speed Signal
- Green: Ground (GND), Handbrake Signal
- Output load capacity: 250 mA max (relays with higher current: 1 relay ≥75 ohms, 2 relays ≥150 ohms)
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall
- Other driver assistance systems
- PDC / warning tones supported
- Some vehicle settings
- Some vehicle information displays
- High-beam assist
- Start/Stop system adjustment
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Suitable for vehicles with OEM device with display
- Vehicles without OEM dashboard monitor or iDrive
- Vehicles without OEM MOST sound system or with OEM MOST sound system: Steering wheel remote control BMW 1 Series/3 Series/5 Series/X5/X6 Quadlock Multilead MOST Amp > Item: 42xbm012
- Active system adapter BMW MOST → RCA > Item: 13-1024-51
- DIP switch settings must follow aftermarket device manufacturer instructions (see operating instructions)
Important Installation Notes
- Compare adapter connectors with those in your vehicle for compatibility
- Verify all vehicle functions, settings, and SWC operation before final assembly
- Reimported vehicles or vehicles with different software may show reduced compatibility
- Follow interface and retrofit device instructions for wiring and configuration
- All connection changes and modifications must be performed by trained specialists
- Improper handling may void the product warranty or damage vehicle, interface, or retrofit device
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
- BMW 1 Series (E81/E82/E87/E88) 03/2004 – 10/2013
- BMW 3 Series (E90/E91/E92/E93) 03/2005 – 10/2013
- BMW X1 (E84) 10/2009 – 06/2015
- BMW Z4 (E89) 05/2009 – 08/2016
Products:
- Colour: Black
- Head Unit Display Cut-Out: 1-DIN standard
- System Type: CANBUS Vehicle
- Includes: 1-DIN radio fascia with radio connection kit and steering wheel remote control
Connection Types
- 40-pin Quadlock BMW connector → Main CAN bus interface
- OEM Steering Wheel Control → 3.5 mm jack / loose cable
- +12V Continuous Power, yellow terminal 30, battery fused
- OEM Antenna Fakra (F) → DIN (M) radio adapter
Provided Signals
- Red: +12 V Ignition Terminal 15
- Orange: +12 V Lighting Terminal 58
- Purple/White: +12 V Reverse Signal
- Pink: Speed Signal
- Green: Ground (GND), Handbrake Signal
- Output load capacity: 250 mA max (relays with higher current: 1 relay ≥75 ohms, 2 relays ≥150 ohms)
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall
- Other driver assistance systems
- PDC / warning tones supported
- Some vehicle settings
- Some vehicle information displays
- High-beam assist
- Start/Stop system adjustment
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Suitable for vehicles with OEM device with display
- Vehicles without OEM dashboard monitor or iDrive
- Vehicles without OEM MOST sound system or with OEM MOST sound system: Steering wheel remote control BMW 1 Series/3 Series/5 Series/X5/X6 Quadlock Multilead MOST Amp > Item: 42xbm012
- Active system adapter BMW MOST → RCA > Item: 13-1024-51
- DIP switch settings must follow aftermarket device manufacturer instructions (see operating instructions)
Important Installation Notes
- Compare adapter connectors with those in your vehicle for compatibility
- Verify all vehicle functions, settings, and SWC operation before final assembly
- Reimported vehicles or vehicles with different software may show reduced compatibility
- Follow interface and retrofit device instructions for wiring and configuration
- All connection changes and modifications must be performed by trained specialists
- Improper handling may void the product warranty or damage vehicle, interface, or retrofit device
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
- BMW 1 Series (E81/E82/E87/E88) 03/2004 – 10/2013
- BMW 3 Series (E90/E91/E92/E93) 03/2005 – 10/2013
- BMW X1 (E84) 10/2009 – 06/2015
- BMW Z4 (E89) 05/2009 – 08/2016
Products:
- Colour: Black
- Head Unit Display Cut-Out: 1-DIN standard
- System Type: CANBUS Vehicle
- Includes: 1-DIN radio fascia with radio connection kit and steering wheel remote control
Connection Types
- 40-pin Quadlock BMW connector → Main CAN bus interface
- OEM Steering Wheel Control → 3.5 mm jack / loose cable
- +12V Continuous Power, yellow terminal 30, battery fused
- OEM Antenna Fakra (F) → DIN (M) radio adapter
Provided Signals
- Red: +12 V Ignition Terminal 15
- Orange: +12 V Lighting Terminal 58
- Purple/White: +12 V Reverse Signal
- Pink: Speed Signal
- Green: Ground (GND), Handbrake Signal
- Output load capacity: 250 mA max (relays with higher current: 1 relay ≥75 ohms, 2 relays ≥150 ohms)
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall
- Other driver assistance systems
- PDC / warning tones supported
- Some vehicle settings
- Some vehicle information displays
- High-beam assist
- Start/Stop system adjustment
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Suitable for vehicles with OEM device with display
- Vehicles without OEM dashboard monitor or iDrive
- Vehicles without OEM MOST sound system or with OEM MOST sound system: Steering wheel remote control BMW 1 Series/3 Series/5 Series/X5/X6 Quadlock Multilead MOST Amp > Item: 42xbm012
- Active system adapter BMW MOST → RCA > Item: 13-1024-51
- DIP switch settings must follow aftermarket device manufacturer instructions (see operating instructions)
Important Installation Notes
- Compare adapter connectors with those in your vehicle for compatibility
- Verify all vehicle functions, settings, and SWC operation before final assembly
- Reimported vehicles or vehicles with different software may show reduced compatibility
- Follow interface and retrofit device instructions for wiring and configuration
- All connection changes and modifications must be performed by trained specialists
- Improper handling may void the product warranty or damage vehicle, interface, or retrofit device
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
![ACV 611023-08-1 Single DIN HU Fitting Installation Kit For BMW X3 [E83] (2004-2010) Black](https://cdn11.bigcommerce.com/s-ewn4vv/images/stencil/320x320/products/8767/95354/1__70493.1773689943.jpg?c=2 "ACV 611023-08-1 Single DIN HU Fitting Installation Kit For BMW X3 [E83] (2004-2010) Black")
![ACV 611023-04-1 Single DIN HU Fitting Installation Kit For BMW Z4 [E85/E86] (2002-2008) Black](https://cdn11.bigcommerce.com/s-ewn4vv/images/stencil/320x320/products/8766/95351/Untitled_design_-_2026-03-17T002827.181__25108.1773689315.jpg?c=2 "ACV 611023-04-1 Single DIN HU Fitting Installation Kit For BMW Z4 [E85/E86] (2002-2008) Black")
