MAIN FEATURES
ACV – Premium Quality Installation Components
Many modern vehicles are equipped with manufacturer‑specific head units designed to match the dashboard’s original appearance. ACV installation kits provide all the essential components required to replace an OEM head unit with an aftermarket system.
Depending on the vehicle’s specification, the kit may include the necessary adapters and interfaces to ensure correct operation of the new unit and to retain supported vehicle functions.
This ACV installation kit is to provide you with the basic installation products required to complete a new radio installation into your vehicle.
Note: Before installation, please review the compatibility notes for each component.
Features:
- Complete Installation Solution – Includes the components required to replace the factory head unit with a compatible aftermarket model. Comes with fascia, SWC interface and antenna adaptor.
- SWC Connector Kits – Supplies all necessary analogue steering wheel control signals for operating a retrofit head unit.
- Vehicle‑Specific Adaptation – Components vary depending on the vehicle’s equipment level and the functionality of the chosen aftermarket unit.
- Plug and Play Install - The components provided are designed to make the installation as easy as possible.
Note: OEM Function Awareness – Some vehicle functions or settings may not be supported by the retrofit head unit. Check the original OEM head unit, vehicle settings, and available functions before installation.
Final System Check – Confirm vehicle functionality, settings access, and steering wheel control operation before completing the installation.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
- Vauxhalll Astra J (PJ) 12/2009 – 06/2012
- Vauxhall Astra J (PJ) 06/2011 – 08/2018
Products:
- Colour: Titanium Gray
- Head Unit Display Cut-Out: 172 mm × 98.5 mm
- System Type: CANBUS Vehicle
- 2-DIN radio fascia with compartment
- Steering wheel remote control interface
- Antenna adapter Fakra Z (M) → DIN (M)
- Optional: INBAY® storage compartment for 2-DIN radio fascias
Connection Types
- 48-pin Opel CAN bus connector – main vehicle interface
- Steering wheel remote control → 42ctmultilead3
- OEM antenna → Fakra Z (M) → DIN (M)
- DIP switches for activating OEM display and aftermarket unit:
- DIP switch 1 ON → Pioneer / OFF → Sony
- DIP switch 2 ON → Vehicles with 2-line display / OFF → Vehicles with 4-line display
Provided Signals
- Red: +12 V Ignition Terminal 15
- Orange: +12 V Lighting Terminal 58
- Purple/White: +12 V Reverse Signal
- Green: Ground (GND) / Handbrake Signal
- Yellow/Black: GND Telephone Mute Signal
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall
- Vehicle settings support
- Warning tones supported
- Rear PDC supported
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Vehicles with CD300 / CD400 OEM unit
- Vehicles with monochrome OEM display
- Vehicles without IntelliLink OEM navigation
- Vehicles without OEM color monitor
- Correct DIP switch settings required depending on aftermarket device and display type
Important Installation Notes
- Check all operating functions and vehicle settings of the OEM device before removal.
- Remove OEM device with power off.
- Verify all interface connections for correctness and continuity with power off.
- Configure the interface and retrofit device according to manufacturer instructions before live connection.
- After connection, test steering wheel remote control, vehicle functions, and interface operation.
- Any changes to hardware configuration or wiring must be performed by trained specialists only.
- Improper modifications may void product warranty and are carried out at your own risk.
- Our support team is available for assistance: 02431-9645-96 | support@acvgmbh.de
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
ACV – Premium Quality Installation Components
Many modern vehicles are equipped with manufacturer‑specific head units designed to match the dashboard’s original appearance. ACV installation kits provide all the essential components required to replace an OEM head unit with an aftermarket system.
Depending on the vehicle’s specification, the kit may include the necessary adapters and interfaces to ensure correct operation of the new unit and to retain supported vehicle functions.
This ACV installation kit is to provide you with the basic installation products required to complete a new radio installation into your vehicle.
Note: Before installation, please review the compatibility notes for each component.
Features:
- Complete Installation Solution – Includes the components required to replace the factory head unit with a compatible aftermarket model. Comes with fascia, SWC interface and antenna adaptor.
- SWC Connector Kits – Supplies all necessary analogue steering wheel control signals for operating a retrofit head unit.
- Vehicle‑Specific Adaptation – Components vary depending on the vehicle’s equipment level and the functionality of the chosen aftermarket unit.
- Plug and Play Install - The components provided are designed to make the installation as easy as possible.
Note: OEM Function Awareness – Some vehicle functions or settings may not be supported by the retrofit head unit. Check the original OEM head unit, vehicle settings, and available functions before installation.
Final System Check – Confirm vehicle functionality, settings access, and steering wheel control operation before completing the installation.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
- Vauxhalll Astra J (PJ) 12/2009 – 06/2012
- Vauxhall Astra J (PJ) 06/2011 – 08/2018
Products:
- Colour: Titanium Gray
- Head Unit Display Cut-Out: 172 mm × 98.5 mm
- System Type: CANBUS Vehicle
- 2-DIN radio fascia with compartment
- Steering wheel remote control interface
- Antenna adapter Fakra Z (M) → DIN (M)
- Optional: INBAY® storage compartment for 2-DIN radio fascias
Connection Types
- 48-pin Opel CAN bus connector – main vehicle interface
- Steering wheel remote control → 42ctmultilead3
- OEM antenna → Fakra Z (M) → DIN (M)
- DIP switches for activating OEM display and aftermarket unit:
- DIP switch 1 ON → Pioneer / OFF → Sony
- DIP switch 2 ON → Vehicles with 2-line display / OFF → Vehicles with 4-line display
Provided Signals
- Red: +12 V Ignition Terminal 15
- Orange: +12 V Lighting Terminal 58
- Purple/White: +12 V Reverse Signal
- Green: Ground (GND) / Handbrake Signal
- Yellow/Black: GND Telephone Mute Signal
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall
- Vehicle settings support
- Warning tones supported
- Rear PDC supported
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Vehicles with CD300 / CD400 OEM unit
- Vehicles with monochrome OEM display
- Vehicles without IntelliLink OEM navigation
- Vehicles without OEM color monitor
- Correct DIP switch settings required depending on aftermarket device and display type
Important Installation Notes
- Check all operating functions and vehicle settings of the OEM device before removal.
- Remove OEM device with power off.
- Verify all interface connections for correctness and continuity with power off.
- Configure the interface and retrofit device according to manufacturer instructions before live connection.
- After connection, test steering wheel remote control, vehicle functions, and interface operation.
- Any changes to hardware configuration or wiring must be performed by trained specialists only.
- Improper modifications may void product warranty and are carried out at your own risk.
- Our support team is available for assistance: 02431-9645-96 | support@acvgmbh.de
MAIN FEATURES
ACV – Premium Quality Installation Components
Many modern vehicles are equipped with manufacturer‑specific head units designed to match the dashboard’s original appearance. ACV installation kits provide all the essential components required to replace an OEM head unit with an aftermarket system.
Depending on the vehicle’s specification, the kit may include the necessary adapters and interfaces to ensure correct operation of the new unit and to retain supported vehicle functions.
This ACV installation kit is to provide you with the basic installation products required to complete a new radio installation into your vehicle.
Note: Before installation, please review the compatibility notes for each component.
Features:
- Complete Installation Solution – Includes the components required to replace the factory head unit with a compatible aftermarket model. Comes with fascia, SWC interface and antenna adaptor.
- SWC Connector Kits – Supplies all necessary analogue steering wheel control signals for operating a retrofit head unit.
- Vehicle‑Specific Adaptation – Components vary depending on the vehicle’s equipment level and the functionality of the chosen aftermarket unit.
- Plug and Play Install - The components provided are designed to make the installation as easy as possible.
Note: OEM Function Awareness – Some vehicle functions or settings may not be supported by the retrofit head unit. Check the original OEM head unit, vehicle settings, and available functions before installation.
Final System Check – Confirm vehicle functionality, settings access, and steering wheel control operation before completing the installation.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
- Vauxhalll Astra J (PJ) 12/2009 – 06/2012
- Vauxhall Astra J (PJ) 06/2011 – 08/2018
Products:
- Colour: Titanium Gray
- Head Unit Display Cut-Out: 172 mm × 98.5 mm
- System Type: CANBUS Vehicle
- 2-DIN radio fascia with compartment
- Steering wheel remote control interface
- Antenna adapter Fakra Z (M) → DIN (M)
- Optional: INBAY® storage compartment for 2-DIN radio fascias
Connection Types
- 48-pin Opel CAN bus connector – main vehicle interface
- Steering wheel remote control → 42ctmultilead3
- OEM antenna → Fakra Z (M) → DIN (M)
- DIP switches for activating OEM display and aftermarket unit:
- DIP switch 1 ON → Pioneer / OFF → Sony
- DIP switch 2 ON → Vehicles with 2-line display / OFF → Vehicles with 4-line display
Provided Signals
- Red: +12 V Ignition Terminal 15
- Orange: +12 V Lighting Terminal 58
- Purple/White: +12 V Reverse Signal
- Green: Ground (GND) / Handbrake Signal
- Yellow/Black: GND Telephone Mute Signal
- Reimported vehicles or vehicles with different software may be incompatible in terms of functions
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall
- Vehicle settings support
- Warning tones supported
- Rear PDC supported
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Vehicles with CD300 / CD400 OEM unit
- Vehicles with monochrome OEM display
- Vehicles without IntelliLink OEM navigation
- Vehicles without OEM color monitor
- Correct DIP switch settings required depending on aftermarket device and display type
Important Installation Notes
- Check all operating functions and vehicle settings of the OEM device before removal.
- Remove OEM device with power off.
- Verify all interface connections for correctness and continuity with power off.
- Configure the interface and retrofit device according to manufacturer instructions before live connection.
- After connection, test steering wheel remote control, vehicle functions, and interface operation.
- Any changes to hardware configuration or wiring must be performed by trained specialists only.
- Improper modifications may void product warranty and are carried out at your own risk.
- Our support team is available for assistance: 02431-9645-96 | support@acvgmbh.de
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
