InCarTec 20-252A-IGN ISO Radio Adapter Cable With CANbus Ignition Interface Antenna For Audi

MAIN FEATURES

This lead is required to fit an aftermarket stereo to your vehicle. It will adapt your vehicle’s wiring to a standard ISO connection which is used on the aftermarket unit. The one end will be the plug to receive the factory fitted audio loom and the other end will be ISO power and speaker blocks to fit into an after-market ISO female plug that comes from most after-market head units.

For a lot of modern vehicles come fitted with a single source factory radios which are CANBUS based. When you want to change these out for an after-market radio, you come up against the issue of them not having an ignition power supply in the factory audio harness for the new after-market radio to work with, as the new radio is dual source. Normally you would then buy an ISO adaptor, to which you would need to manually input your own ignition feed which requires knowledge, tools and labour to do. Well not anymore! This cables removes all of that as it includes a little CAN decoder box which will provide an ignition supply from the cars CAN bus data system when the key is in the accessory position, which makes it easy to fit and plug and play.

KEY ATTRIBUTES:

• High impact ABS plastic of moulded connectors to provide the perfect fit
• New GSXL wire provides more flexibility, handles more power and it is heat resistant
• OEM quality of terminals provides the most secure connection between the terminals and the connectors
• Includes CAN decoder box to provide ACC source
• Plug and Play installation
• Removes the requirement of knowledge, tools and labour for the installation

Please Note: This lead is not suitable for connecting Steering/Stalk controls on your car.

VEHICLE COMPATIBILITY LIST

This ISO harness is designed for the following vehicles:

Audi - A2 [8Z] (1999 - 2005)
Audi - A3 [8L] facelift (2000-2003)
Audi - A3 [8P] (2003 - 2007)
Audi - A4 [B6] (2001 - 2005)
Audi - A4 Cabriolet (2001 - 2009)
Audi - A6 2nd Gen [C5/4B] (1997 - 2004)
Audi - TT MK1 [8N] (1998 - 2006)

NOTE: Most early model Audi TT cars do not have an ignition signal on the CANbus data, this interface will not generate an ignition supply on these earlier models.

The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.