InCarTec 29-630 Steering Wheel Interface ISO For Pre 2007 Chrysler and Jeep

MAIN FEATURES

This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to. 

PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.

FEATURES:

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
• Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
• Please check the connections in the vehicle match the harness you are purchasing

VEHICLE COMPATIBILITY LIST

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.

Please note:

This interface has a loose wire which needs to be joined to a wire underneath the cars steering cowling. Full instructions are included. This interface is for vehicles that do not have CANbus wires at the back of the radio (CANbus at the radio was introduced around 2005). The CANbus wires are white and white/orange in pins 5 and 6 in the 22 pin connector at the back of the radio.

Vehicle fitment (guide only):

• Chrysler - Grand Voyager 4th Gen Facelift (2002 - 2008)

• Chrysler - PT Cruiser 1st Gen) (2002 - 2005)

• Chrysler - Voyager 4th Gen Facelift* (2002 - 2008)

• Dodge - Ram 3 (2002 - 2005)

• Jeep - Cherokee 3rd Gen (KJ) (2002 - 2007)

• Jeep - Grand Cherokee 2nd Gen Facelift (2002 - 2005)

• Jeep - Wrangler 2nd Gen Facelift (2003 - 2006)

Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.