InCarTec 29-UC-050-CHR1 Steering Wheel Interface ISO For Chrysler Dodge CANbus And Amplifier

MAIN FEATURES

This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to. 

PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.

FEATURES:

• This interface connects to the CANbus wires at the back of the radio. These are white and white/orange wires in pins 5 and 6 in the 22 way connector. Vehicles from 2005 generally had the CANbus wires present at the radio. We do recommend removing the head unit to check if the CANbus wires are present if the vehicle around a 2005 production year.

• The CANbus interface retains the use of the original audio controls on the steering wheel with an after market head unit.
• The interface also switches on the original amplifier in the car via a CANbus turn on signal.
• Gives out speed pulse and reverse gear CANbus signals.

VEHICLE COMPATIBILITY LIST

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.

Vehicle fitment (guide only):

• Chrysler 300C 1st Gen (2005-2011)
• Chrysler PT Cruiser (1st Gen Facelift) (2006-2008)
• Dodge Caliber (2006-2008)
• Jeep Commander (XK) (2006-2009)
• Jeep Compass 1st Gen (MK49) (2007-2009)
• Jeep Grand Cherokee 3rd Gen (WK) (2005-2010)
• Jeep Patriot (MK74) (2007-2013)

Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.