InCarTec 29-683 Steering Wheel Interface ISO For Nissan Qashqai Navara X-Trail Micra Juke (20 Pin)

MAIN FEATURES

This Steering Wheel Control Interface to allow plug and play installation of an after-market head unit into a vehicle whilst maintaining use of the steering wheel controls. Steering control and stalk adaptors have a very simple but useful function - essentially, they enable you to retain the use of your steering wheel controls when you have an aftermarket head unit fitted, so you can control and enjoy your in-car entertainment exactly the way you want to. 

PLEASE NOTE: Each interface is compatible with a range of patch leads. An additional patch lead is required for the steering controls depending on the make of radio being fitted. If unsure please SEE HERE.

FEATURES:

• Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
• Safety: Allows you to keep your hands on the steering wheel and eyes on the road.
• Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit
• Please check the connections in the vehicle match the harness you are purchasing

VEHICLE COMPATIBILITY LIST

Steering wheel control interface and adapter cable for Nissan Juke, Micra K13, Navara D40, Note, Qashqai and X-Trail cars to fit an aftermarket radio upgrade.

The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. The steering wheel control interface is built in to the adapter cable for a plug and play installation.

This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volume, track skip, source, phone and preset skip buttons. (8 function steering wheels) The Enter and Back buttons will not be functional after the radio has been changed.

This interface fits cars with the newer 20 way connector behind the radio which has two larger terminals on either side for power and earth.
For compatible Bluetooth Head-units press the phone button to answer phone, press and hold the phone button to reject/end a call.
These radios will also have an additional smaller connector, this is used for CD changer and navigation audio. It is not used when changing the head unit.

For models with 8 button SWC configration, which was usually models with stock navigation.

Vehicle fitment (guide only):

• Nissan 370Z Coupe, Roadster (2009 onwards)

• Nissan Juke 1st GEN [F15] (2010-2014)

• Nissan Juke 1st GEN Facelift [F15] (2014-2019)

• Nissan Micra [K13] (2010-2017)

• Nissan Navara [D40] (2005-2016)

• Nissan Note (2013-2018)

• Nissan Pathfinder [R51] (2005-2013)

• Nissan Qashqai 1st Gen [J10] (2007-2013)

• Nissan Serena 3rd Gen [C25] (2005-2010)

• Nissan Tiida (2004-2011)

• Nissan X-Trail 2nd Gen [T31] (2007-2014)

   

Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.

Note: You may also require other accessories to fit your car stereo eg. fascia adapter or an aerial adaptor. You will not require an ISO stereo lead as it can be substituted for this steering wheel adapter. We stock the full range of stereo fitting parts, just ask if you need help.