MAIN FEATURES
ACV – Premium Quality Installation Components
Many modern vehicles are equipped with manufacturer‑specific head units designed to match the dashboard’s original appearance. ACV installation kits provide all the essential components required to replace an OEM head unit with an aftermarket system.
Depending on the vehicle’s specification, the kit may include the necessary adapters and interfaces to ensure correct operation of the new unit and to retain supported vehicle functions.
This ACV installation kit is to provide you with the basic installation products required to complete a new radio installation into your vehicle.
Note: Before installation, please review the compatibility notes for each component.
Features:
- Complete Installation Solution – Includes the components required to replace the factory head unit with a compatible aftermarket model. Comes with fascia, SWC interface and antenna adaptor.
- SWC Connector Kits – Supplies all necessary analogue steering wheel control signals for operating a retrofit head unit.
- Vehicle‑Specific Adaptation – Components vary depending on the vehicle’s equipment level and the functionality of the chosen aftermarket unit.
- Plug and Play Install - The components provided are designed to make the installation as easy as possible.
Note: OEM Function Awareness – Some vehicle functions or settings may not be supported by the retrofit head unit. Check the original OEM head unit, vehicle settings, and available functions before installation.
Final System Check – Confirm vehicle functionality, settings access, and steering wheel control operation before completing the installation.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
Citroen
- Citroen Relay (2006–2014)
Fiat
- Fiat Ducato (2006-2014)
Peugeot
- Peugeot Boxer (2006-2014)
Products:
- Colour: Black
- Head Unit Type: 2-DIN Radio Fascia with Storage Compartment & Radio Connection Kit
- System Type: Analog Vehicle System
Connection Types
- ISO / Mini-ISO Connector – Main vehicle interface
- OEM Steering Wheel Remote Control → 3.5 mm Jack / Loose Cable
- OEM Antenna ISO (Female) → DIN (Male) Adapter
Provided Signals
- Steering Wheel Remote Control Support
- Installation Notes:
- If steering wheel remote control functions are reversed, swap the green/blue wires in the connector
- DIP switch settings may be required depending on the aftermarket head unit manufacturer
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall system
- Certain driver assistance systems
- Some vehicle menu settings and information displays
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Vehicles with radio preparation but without OEM head unit installed
- Vehicles with analog steering wheel remote control via Mini-ISO connector
- Vehicles with +12V ignition signal available
Important Installation Notes
- Verify OEM device functions and vehicle settings before removing the original unit
- Ensure adapter connectors match the vehicle wiring both visually and technically
- Configure interface settings and hardware while the system is powered off
- Connect all cables according to the retrofit device manufacturer instructions
- Connect the vehicle power supply last during installation
- Configure steering wheel control and other functions in the aftermarket head unit settings
- Test steering wheel controls and vehicle functions before final installation
- Any wiring modifications or alternative connections must be carried out by trained specialists
- Changes to the wiring harness or interface may void the product warranty
- Vehicles with different equipment versions or software may have limited compatibility with some functions
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
MAIN FEATURES
ACV – Premium Quality Installation Components
Many modern vehicles are equipped with manufacturer‑specific head units designed to match the dashboard’s original appearance. ACV installation kits provide all the essential components required to replace an OEM head unit with an aftermarket system.
Depending on the vehicle’s specification, the kit may include the necessary adapters and interfaces to ensure correct operation of the new unit and to retain supported vehicle functions.
This ACV installation kit is to provide you with the basic installation products required to complete a new radio installation into your vehicle.
Note: Before installation, please review the compatibility notes for each component.
Features:
- Complete Installation Solution – Includes the components required to replace the factory head unit with a compatible aftermarket model. Comes with fascia, SWC interface and antenna adaptor.
- SWC Connector Kits – Supplies all necessary analogue steering wheel control signals for operating a retrofit head unit.
- Vehicle‑Specific Adaptation – Components vary depending on the vehicle’s equipment level and the functionality of the chosen aftermarket unit.
- Plug and Play Install - The components provided are designed to make the installation as easy as possible.
Note: OEM Function Awareness – Some vehicle functions or settings may not be supported by the retrofit head unit. Check the original OEM head unit, vehicle settings, and available functions before installation.
Final System Check – Confirm vehicle functionality, settings access, and steering wheel control operation before completing the installation.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
Citroen
- Citroen Relay (2006–2014)
Fiat
- Fiat Ducato (2006-2014)
Peugeot
- Peugeot Boxer (2006-2014)
Products:
- Colour: Black
- Head Unit Type: 2-DIN Radio Fascia with Storage Compartment & Radio Connection Kit
- System Type: Analog Vehicle System
Connection Types
- ISO / Mini-ISO Connector – Main vehicle interface
- OEM Steering Wheel Remote Control → 3.5 mm Jack / Loose Cable
- OEM Antenna ISO (Female) → DIN (Male) Adapter
Provided Signals
- Steering Wheel Remote Control Support
- Installation Notes:
- If steering wheel remote control functions are reversed, swap the green/blue wires in the connector
- DIP switch settings may be required depending on the aftermarket head unit manufacturer
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall system
- Certain driver assistance systems
- Some vehicle menu settings and information displays
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Vehicles with radio preparation but without OEM head unit installed
- Vehicles with analog steering wheel remote control via Mini-ISO connector
- Vehicles with +12V ignition signal available
Important Installation Notes
- Verify OEM device functions and vehicle settings before removing the original unit
- Ensure adapter connectors match the vehicle wiring both visually and technically
- Configure interface settings and hardware while the system is powered off
- Connect all cables according to the retrofit device manufacturer instructions
- Connect the vehicle power supply last during installation
- Configure steering wheel control and other functions in the aftermarket head unit settings
- Test steering wheel controls and vehicle functions before final installation
- Any wiring modifications or alternative connections must be carried out by trained specialists
- Changes to the wiring harness or interface may void the product warranty
- Vehicles with different equipment versions or software may have limited compatibility with some functions
MAIN FEATURES
ACV – Premium Quality Installation Components
Many modern vehicles are equipped with manufacturer‑specific head units designed to match the dashboard’s original appearance. ACV installation kits provide all the essential components required to replace an OEM head unit with an aftermarket system.
Depending on the vehicle’s specification, the kit may include the necessary adapters and interfaces to ensure correct operation of the new unit and to retain supported vehicle functions.
This ACV installation kit is to provide you with the basic installation products required to complete a new radio installation into your vehicle.
Note: Before installation, please review the compatibility notes for each component.
Features:
- Complete Installation Solution – Includes the components required to replace the factory head unit with a compatible aftermarket model. Comes with fascia, SWC interface and antenna adaptor.
- SWC Connector Kits – Supplies all necessary analogue steering wheel control signals for operating a retrofit head unit.
- Vehicle‑Specific Adaptation – Components vary depending on the vehicle’s equipment level and the functionality of the chosen aftermarket unit.
- Plug and Play Install - The components provided are designed to make the installation as easy as possible.
Note: OEM Function Awareness – Some vehicle functions or settings may not be supported by the retrofit head unit. Check the original OEM head unit, vehicle settings, and available functions before installation.
Final System Check – Confirm vehicle functionality, settings access, and steering wheel control operation before completing the installation.
VEHICLE COMPATIBILITY LIST
This kit has been put together for the following vehicles, depending on the factory fitted head unit. See notes for important information regarding this.
Designed For:
Citroen
- Citroen Relay (2006–2014)
Fiat
- Fiat Ducato (2006-2014)
Peugeot
- Peugeot Boxer (2006-2014)
Products:
- Colour: Black
- Head Unit Type: 2-DIN Radio Fascia with Storage Compartment & Radio Connection Kit
- System Type: Analog Vehicle System
Connection Types
- ISO / Mini-ISO Connector – Main vehicle interface
- OEM Steering Wheel Remote Control → 3.5 mm Jack / Loose Cable
- OEM Antenna ISO (Female) → DIN (Male) Adapter
Provided Signals
- Steering Wheel Remote Control Support
- Installation Notes:
- If steering wheel remote control functions are reversed, swap the green/blue wires in the connector
- DIP switch settings may be required depending on the aftermarket head unit manufacturer
Supported / Not Supported Functions
Depending on vehicle equipment, software version, and the retrofit head unit, some functions may not be available.
May Be Limited or Not Supported.
- Trailer Assist
- eCall system
- Certain driver assistance systems
- Some vehicle menu settings and information displays
OEM Head Unit Compatibility Notes
This kit is suitable for:
- Vehicles with radio preparation but without OEM head unit installed
- Vehicles with analog steering wheel remote control via Mini-ISO connector
- Vehicles with +12V ignition signal available
Important Installation Notes
- Verify OEM device functions and vehicle settings before removing the original unit
- Ensure adapter connectors match the vehicle wiring both visually and technically
- Configure interface settings and hardware while the system is powered off
- Connect all cables according to the retrofit device manufacturer instructions
- Connect the vehicle power supply last during installation
- Configure steering wheel control and other functions in the aftermarket head unit settings
- Test steering wheel controls and vehicle functions before final installation
- Any wiring modifications or alternative connections must be carried out by trained specialists
- Changes to the wiring harness or interface may void the product warranty
- Vehicles with different equipment versions or software may have limited compatibility with some functions
UK Deliveries: Free UK mainland delivery applies to orders over £30 (exceptions apply to remote regions and islands, which will see a surcharge at checkout).
Orders Under 2kg: Most in-stock items arrive in 2–3 working days. Items held by suppliers take 4–6 working days. (Note: Saturday is not a working day).
Orders Over 2kg: Dispatched via trusted couriers including AMAZON Shipping, Royal Mail, DPD, and UPS.
Royal Mail Specifics: Royal Mail aims to deliver in 1–3 working days, though this is not guaranteed. If your item has not arrived after 7 days, please contact us. We can only replace missing items after 14 days have passed.
More information (including international delivery on our Delivery Information page.
